Key Features Modular interface design for various panel test application

Key Features:

• Signal complies to the MIPI DSI v1.2 / MIPI D-PHY v1.1 specifications and standards
• Supports 1, 2, 4, 8 lane MIPI output
• Lane rate: 1.5Gbps
• Configurable to 565, 666, 888 pixel format
• Equipped with ESD protection devices for output

Introduction:

A040209 is a MIPI signal module board and complies with the MIPI DSI v1.2 / MIPI D-PHY v1.1 signal specifications and standards. A040209 is used with the FPD Tester and can be applied to MIPI Display testing, providing MIPI Panel standard signals and other related controls.

Key Features:

• Compliant with eDP 1.4 standard
• Support 1, 2, 4, 8 lane eDP output
• Support eDP v1.4 with 7 Lane rates (1.62Gbps, 2.16Gbps, 2.43Gbps, 2.7Gbps, 3.24Gbps, 4.32Gbps, 5.4Gbps) defined
• Support Manual / Auto Training mode
• Support Pre-emphasis settings (0dB, 3.5dB, 6dB, 9.5dB)
• Support Swing level (200mv, 250mV, 300mV, 350mV, 400mV, 450mV, 600mV, 800mV, 1000mV)
• Able to set 6, 8, 10 bits
• VDD provides over voltage/over current protection
• Support 2 separate AUX and HPD channels
• Equipped with ESD protective components for output

Introduction:

The A040205 is an eDP 5.4G signal module that is compliant with the eDP 1.4 standard for advanced eDP testing when working with the FPD Tester. The signal module provides standard signals and related controls for eDP Panel.

Key Features:

• Able to set 6, 8, 10 bits 
• Able to set 4, 8, 16 Lane channels per UUT's requirements
• Lane rate: 3.75Gbps
• Data Mapping:
  • 4 Lane: Non-Division (4 Lane *1)
  • 8 Lane: 2 Division (4 Lane * 2)
  • 16 Lane: Non-Division (16 Lane *1), 2 Division (8 Lane *2), 4 Division (4 Lane *4), 8 Division (2 Lane *8)

Introduction:

The A040204 is a V-by-One signal module that can work with FPD Tester for V-by-One testing.  It provides standard signals and related control for V-by-One Panel.